These trays are a trendy location to stock secrets or change. You’ll requirement a 1′ x 2′ sheet of leather or felt to make both material catchalls.

Attach a sheet of iron-on adhesive to the unfinished side of the leather or felt. peel off the backing, apply your material (print side up), as well as iron once again to seal.

Using a rotary cutter as well as metal ruler, cut out a 7″- sq. sheet as well as 8″ x 10″ rectangle. cut out 1″ squares from each corner of both pieces. (They will now look like thick plus signs.)

Use a hammer as well as nail to punch two holes along the inner edge of each cutout.

Thread a leather cord with two adjacent holes, pull the edges together to type a point as well as knot. Repeat for other corners.